Showing posts with label screw. Show all posts
Showing posts with label screw. Show all posts

Wednesday, December 2, 2015

Review: Mininch - Mini tool Pen and Tool Pen

Seen first on Breach Bang & Clear, here:

I am all for small, modular and resilient tools, and there comes a time when you just need to have a handy stealthy tool ready to go.

This is the Mininch - Mini tool Pen and Tool Pen set which I picked up via Kickstarter.

I opted for the full bells and whistles set, which included all the extra hex bits and both the new mini-tool pen, and the original tool pen.

They are for sale, live, here:
The mini-tool pen is milled from 6061 aluminum, sand-blasted finish. The tool itself measures 133.5 mm  / and is 12.8 mm in diameter  and weighs 46 g (with 5 bits inside).

  •  The bits are S2 tool steel and measure  35.6mm  long and 7.1mm in diameter. They weigh a mere 4.5 g apiece. The tool Pen mini comes with 18 bits: 
  • Slotted Bits (Flat): SL1.5, SL2, SL2.5, SL3
  • Phillips Bits: PH00, PH0, PH1
  • Hexagon Bits (Hex): H0.9, H1.3, H1.5, H2 
  • Torx Bits (Star): T5, T6, T7
  • Torx Security Bits: TR8, TR9, TR10
  • Square Bits: S1
  • SIM Eject Tool: 0.8
  • Pentalobe Bits: P2, P5, P6

The classic Tool Pen is made of the same 6061 aluminum, sand-blasted finish as the Tool Pen mini. It does however weigh 93g (with 6 bits inside) and measure up a hefty 150mm in length and 17.5mm in diameter.
 
Both tools are offered in Snow Silver, Gunmetal and Champagne Gold anodization finishes. I chose gunmetal because of reasons, ha!

The bits for the classic tool pen are 36mm long and 9mm in diameter   and weigh 7g each. The bits are not cross compatible between the tools, but given the ranges of the two, thats not really a problem.
 The classic tool comes with:
  • Slotted Bits (Flat): SL3, SL4, SL4.5
  • Phillips Bits: PH1, PH2
  • Hexagon Bits (Hex): H2, H2.5, H3, H4 
  • Star Bits: T10, T15, T20, T25
  • Imperial Hex Bits: H5/64, H3/32, H1/8, H5/32
  • Robertson / Square Bits: S1, S2, S3
  • Pozidrive Bits (Pozi): PZ1, PZ2
    Both the Tool Pen classic and the Tool Pen Mini feature magnetically closing caps, and a really interesting tool seating and shifting system.

    Inspired by “Pop-A-Point” rainbow pen & mechanical pencil,  the bits all sit within the tool, in hex-shaped lanes, each nesting into the base of the one above it, and held in place, top and bottom, but a steel ring, much like a press-stud is. You shift the bits by feeding another bit up from the back end, and along they go.  Each bit has the sheer support of the hex-shaped tool to support it internally, so they are really effective. You do need a full pen's worth of bits to make them effective, however.

    Cut-out windows in one face of the tool allow you to see the contents and order of the bits stored within, using a very clear icon engraved on the side of the bit. The magnets in the caps don't interfere with the bits, although they don't really effectively allow you to store the caps when using the tools.

    Between the range of bits offered, and the ease in which they all store, either internally for your most-often used sets, or in the solid, flip-top bit cassettes you can get a pretty wide range of tools in a very dense package with either of these tools, doubly so with both.

    This is super useful when traveling, especially overseas, when you might find yourself needing to get into something, fix, repair or open some technology that you can't reliably ask someone else to do so, and having a fully decked out specialty screw-driver set is simply brilliant.

    Tuesday, September 22, 2015

    Review: Kickstarter - Keystone2

    I did a review a while back of a key holder project that was Kickstarted  by Abel Ang and I was impressed with its elegance then, so was very pleased to hear that he had a new and improved version on the cards. He sent me a prototype, and asked me to write up my impressions of it, for when the new Kickstarter which is about to go live.

    I really hope that this new launch works well for Abel, and want to give you some honest options about the kit in time for you to go and pledge to get one of your very own, should the idea appeal.


    The finish of the frames has been improved, with a brushed surface and is anodized rather than powder coated, which will mean a much longer lasting surface finish, keeping your key-keeper looking neater. The body is 5mm longer, to a total of 90mm allowing you to store longer keys.  The scew-heads have been slimmed down and are now offered in two sizes, to allow as few as two keys to be stored, for a very elegant system. The same extra spacer bars are included and allow you to for as many as 20 keys.

    Another improvement is the bolt holes have been pared down from 4mm to 3mm such that the bolts fit very snugly, eliminating the rattle that the old version was a little prone to. That rattle allowed a slight wobble that continually loosened the screw-heads.  Tighter tolerances mean less noise.

    The improvements all add up to a considerably better key-keeper, and I was only too pleased to pass the new prototype on my partner Omega, who happens to always loose loose keys, and has quite the penchant for red, so it was a perfect gift to pass on.

    If you have keys, you should totally look into getting one of these.
    Related Posts Plugin for WordPress, Blogger...