Showing posts with label cleaning. Show all posts
Showing posts with label cleaning. Show all posts

Saturday, June 8, 2019

Review: BioFuture wipes

My friends at EcoFuture have taken the bold leap  to launch a Kickstarter campaign for one of their new products and its something I thought I should share. EcoFuture have always looked for ecologically friendly solutions for cleaning, health and hygiene.  From body and foot sprays to water purification and household cleaners. Before you scoff at the domesticty of this remind yourself how little fun a bout of gastro or swamp-ass is on the trail. Even the most salty operators need to poop now and then. If you're on the trail ans have to drop one off, the last thing you want is to be hiking on without a good wipe. Having comfortable wipes can be a real morale booster, but you also don't want to be leaving wads of long-life paper or fabric wipes (even in shallow latrines). This is where something like the BioFuture Baby All Natural wipes comes into its own.

These wipes are made from a  truly flushable and biodegradable material, made from all natural, sustainably sourced plant based fiber - (and are certified as such by the Forest Stewardship Council  ) The wipes are suitable for domestic use, aircraft in-cabin use, and safe for municpal sewer systems. They will not harm wildlife.


HRIPT skin patch testing was performed and the wipes can make the hypoallergenic claim, safe for baby bums and crusty mountain men ( who may or may not also be crusty). Get clean without giving away your position with heavy floral scents.

Being fully biodegradable makes them a logical choice for those on local septic systems or composting toilets. Part of why the folks at EcoFuture are thrilled to offer parents an alternative to wipes made with harmful ingredients and preservatives is that as well as the fabric of the wipes themselves, the patented formula is nutraceutical (food) grade.) , will not harm our waterways or wildlife. Given a lack of harsh preservatives you might question their longevity, but following extensive laboratory testing and the product has shelf life of two years. Lightly scented and fresh feeling on the skin, and in combination with the soft and resilient fabric I've manged to give myself a dry-bath all over. Having nice clean toes can be such  a relief after a couple of days hiking and camping (Change your socks!) and really helped me battle camp-funk.

The wipes themselves measure 21cm x 14cm and are interleaved in the plastic packet for easy withdrawal one after another. There are 40 wipes per packet.  The packet itself had both a hard sealing flap and a soft closing flap to seal in the moisture of the cleansing and preservation solution. I compared these wipes to a standard brand, which had a slightly different size (32cm x 17cm) but I found this made very little appreciable difference when using them.  I found slightly smaller BioFuture wipes withdrew from  the packet easier, with less chance of  a double-up on wipe withdrawal, leading to less waste. I also found that the BioFuture wipes were more resilient and less prone to tear or fray, which means more wiping and scrubbing per sheet (and less likely to tear through and poop your wiping hand) something any nappy-changing parent or stubble faced-lout will appreciate.

Additionally Eco Future are working towards making a completely zero waste product. At present there is no alternative for the outer packaging that will keep the contents moist and withstand heated ovens for stability testing. They do want this to happen and are working towards creating this packaging technology!

I'm very  excited to let you know that their Kickstarter campaign is now live.



Thursday, September 14, 2017

Quick review: Gloax - MP Magic socks!

Everyone loves a pair of good socks. Your feet will thank you and it can really make a difference to your effectiveness. Regular socks, be they woolen, cotton or more exotic materials like bamboo or the like are a big step up from nylon or acrylic blend, especially when it comes to smell. However, science has advanced and offers some other alternatives.


After a sweaty work out, or a long travel, or in the morning, you will definitely appreciate the difference a pair of clean dry socks. even more so if they're not stinky and are comfortable. The clever minds behind the Glovax gloves would like to introduce their MP Magic socks, they claim as "world's best odorless socks".




These socks are made from some very unique materials; This fabrics are infused with not one, but three antimicrobial metals: Silver, Copper and Zinc! Multiple metals can kill more types of odour and disease causing microbes. The the antibacterials effects will be much better than single. Silver is known as a great antibacterial meta, featuring in everythign from bandages to homeopathic potions, copper can kill bacteria too and it is also a key component of many enzymes, Zinc can reduce bacterial loads and thus odour too! This three metal infused technique takes existing techniques and layers them for increased coverage and effects. Based on a specially treated cotton, with a proprietary blend of mineral substances, enhance the performance of the metal elements, and  are never washed away.


I wear boots. all day, every day. That's a pretty rough task for any sock. I hike, train and work in my boots. In winter time I like to leave my socks on because I'm very tall and my feet stick out of the covers. even with daily sock changes and foot washing, that takes a toll. I was sent some of these socks and tried them out. I wore the same pair for a week. I chose the ankle socks because I was purely interested in the foot effects. They were great!



With these functional fabrics, you can take off your shoes without any hesitation over worrying about their smell. A weeks worth of almost constant wear,including a 4 hour hike and a few hours of Viking training. My feet felt great and smelled pretty good too. The socks are breathable and even when my feet got hot and sweaty, a quick pull out and wave around both cooled them and dried then off. Think that comes down to the metal infusion of the fabric but also the design and cut of the sock certainly comes into it. More than just a modern miracle textile, these specially designed the socks at the toe and heel area, perfectly match the human foot shape, make that part super breathable and durable!

With their metal infused fabric these socks are designed to transfer heat more efficiently, and be more durable! Odorless, Comfortable, Antibacterials, super durable,Breathable. I gave them a pretty solid thrashing and they bounced back well. They work well as advertised, are comfortable and resilient day after day.

The Glovax team, just finished a campaign about a set of rugged cool work-gloves. Which are well worth checking out as well.

Tuesday, November 10, 2015

Review: Scrubba washbag



I was lucky enough to be given a new piece of camping and travel gear for my birthday and I've finally gotten around to writing it up. I took it with me to Bali on a recent holiday, although it didn't get a very thorough workout there. This is the Scrubba washbag

The Scrubba is essentially a dry-bag which has been fitted with an internal washboard surface, a viewing window and an air vent, in addition to the watertight bag and roll-top closure

As a modern and convenient take on the old fashioned washboard, the Scrubba wash bag enables you to achieve a machine quality wash in just minutes. I wanted to give it a fairly good test, so I found a couple of t-shirts with some pretty suspicious and gross stains, and a couple of pairs of socks to give a good indicator of what it is capable of, and a standard travel-load of washing.

The Scrubba is pitched as perfect for holidaymakers, business travellers, backpackers or even for washing gym and cycling gear. The bag weighs less than 145g and folds to pocket-size, as with any dry-bag, making it small enough to take anywhere. I used it as a wet-clothes pack when on the last legs of our Bali trip, to stow Tactical Baby and Triceratops Girl's beach clothes before we headed off for the airport.

Here's how you use the Scrubba for its designed purposes:

1. Fill: It takes about 2L of water, on top of clothes, to do a full wash. Add water, cleaning liquid and clothes to the Scrubba. I used dishwashing soap, just a quick squirt, on top of my load, and the wash bag was at about 20-40% capacity. I used the printed-on guidelines, and with my two-shirts, two pair of socks load, I felt I had a good sized volume

2. Roll & Clip: I removed the excess air from the bag by scrunching it down, then rolled down the top around 4-5 times to get a good tight seal, and then clipped the ends shut, as you would with any dry-bag.


3. Deflate: By opening the nipple cap and squeezing the valve, as you would on any set of arm floaties, inflatable sheep or camping mattress, you need to expel all remaining air from the Srubba wash bag. This gives you a good working volume with which to scrub your clothes. Too much air leaves the bag inflated like a bag balloon and makes it hard to work the clothes. Too much water can have a similar effect, but less noticeably.

4. Rub: By pressing down and rubbing clothes against the Scrubba’s unique internal flexible washboard, which is a moulded-in set of nipples set into the back wall of the bag. Rubbing for 30 seconds gives you a quick traveller's wash and going for around 3 minutes should do for almost a machine quality wash. I wondered how my fairly scungy shirts and socks would fare, and was not surprised to see the water darken and grey-up. There was surprisingly little froth, probably due to the lack of air in the well vented bag.


5. Rinse: Uncliping and unrolling the Scrubba’s seal is as easy as it is to roll up. Removing dirty water from the Scrubba is as simple as carefully up-ending it to mouth it from the wide-mouth opening. I took care to retain my freshly washed clothes, and not dropping it in the dirt again. I wrung out my clothes to remove as much of the grey-water, and then tossed them all back in. I rinsed the clothes with another couple of Liters of water in the Scrubba and gave it a good shake, with the roll-top closed but not evacuated of air, and again poured it off, and wrung out my clothes. You could just as easily rinse them under a running tap or shower, but I wanted an all-in-the-bag method.



I hung my freshly scrubbed clothes out, and left them on the line overnight. In the morning, I was pleased to find not only did my shirts and socks look much cleaner, but they also smelled much better. The Scrubba bag had certainly worked well enough for a travel, camping or survival setting. I might not want to do my next job-interview in a Scrubba-washed suit, but if I were traveling and spilled cooled monkey brains down the front of my dress-short, I might certainly look to pull the Scrubba out to set me fresh for my next engagement.



Well worth looking into if you're either traveling off-grid, or frequently grot yourself up. I'm thinking it would make my next Tough Mudder trip home a lot cleaner!




Wednesday, March 4, 2015

Review: MS Clean kit

This is one of those items that I really picked up for the show-factor alone, rather than for any real practical need. I saw it come up on my Kickstarter feed, as well as on Soldier Systems, where I find a number of cool pieces of tech and tools. So, first up, my admissions: I don't own any fire-arms, but I do a variety of costume and Live-action roleplay events, which is where my "for show only" interest lies.

This is the MS Clean kit.

Whilst I don't own or operate any myself, I appreciate the need to maintain and clean both firearms, and all the tools of the trade, so to speak. I also have a LOT of pouches, and have on occasion had small needfuls drop out and get lost as a result of being adventurous with them in a pouch designed to hold magazines.

I've regularly used my Platatac FUP and other mag pouches to carry my gear, and I saw the utility of a case that married with my existing pouches. The guys from MS Clean offer the cleaning kit to fill the gap they felt existed with the current issued cleaning kits in the US military, and wanted to take advantage of the prevalence of magazine pouches.

The case is curved like a 30 round STANAG or MagPul P-Mag and initial designs looked a little like the P-Mag, with surface ribbing for grip and structure. Made of an injection molded polymer, crush-proof cases prevents spillage of lubricant and bending of rods that they say current issued kits don't. The cases are long enough to old 3x sectioned steel rods, required to remove barrel obstructions like mud, stuck cases or squib rounds. They also include a couple of brush heads, and eyelet head, and a T- handle to drive the lot of it.

The production models include bore brushes for 5.56 as well as 7.62 and 9mm, as well as a dental pick, for all that carbon scoring. The polymer is chemical resistant so the case can be used as a miniature solvent tank, as well as acting as a container to place small parts of a firearm while cleaning.

They also offer them in a couple of different colours, black, tan, green and red. The internal dimensions are 1.8cm (0.72") x 5.3cm  (2.10") x 19.3cm (7.62") and externally 2.4cm (0.95") x
6.7cm (2.65")x  20.3cm (8").

I will be setting mine up as snack and tool carriers, perhaps using the red one as a dedicated boo-boo set, with alcohol wipes and small dressings, maybe even one of the Z-Medica quick clots. I can't comment on the quality of the cleaning tools myself, but I asked out one of my trooper friends to trial it out for me.

"The cleaning kit was a great bit of gear. First i would like to say that the case it comes in is a fantastic piece of gear. It fits in a spare mag pouch nicely and is easily accessible. The frogman lube is a great and does a good job. I found the wire brushes a bit too harsh though and the pull through rods rusted up very quickly. I was impressed with the extra brushes it came with. Its definitely a cleaning kit I carry in my webbing now." - K Taylor WA


The folks at MS Clean copped a lot of flack over the shape and design of the cases, being so close to "real" magazines. Here's what they had to say:

MS CLEAN may be mistaken for an actual magazine 
MS Clean is designed to utilize standard magazine pouches; however, these pouches are modular in nature and as such, the pouch selected to store MS Clean should be mounted in an area where it is not easily confused with an actual magazine.

What happens if I am in the dark and I go to change my magazine and try to put my cleaning kit in my rifle and get myself killed?
You won’t. You are a professional soldier or law enforcement officer, you have undergone months, if not years of training and you would never be so daft as to put your cleaning kit among your actual magazines. You would put it in somewhere else on your gear that wasn't on the front of your vest.

They are pretty prefect for my applications, and I look forward to kitting out my adventure gear (not to mention my kooky-costuming) with them.


To add to the mix, they now have a second Kickstarter underway for the DOUBLE sized kits. Twice the storage, twice the options, including a dedicated medic options, a trauma kit and super-deluxe cleaning options.

Sunday, November 2, 2014

Home Front: eww, don't get your Ebola on me!


So, I've been asked by a few different people "just what CAN we do to be safe from Ebola?"

Before I get into the details of PPE and other practices and procedures, I think it's worthwhile checking out some details on how you CAN'T get Ebola: I go to the CDC for all my Ebola guidance, and take their advice to heart. These are the people who know. Listen to the local guides ....

"In healthcare settings, Ebola is spread through direct contact (e.g., through broken skin or through mucous membranes of the eyes, nose, or mouth) with blood or body fluids of a person who is sick with Ebola or with objects (e.g., needles, syringes) that have been contaminated with the virus. For all healthcare workers caring for Ebola patients, PPE with full body coverage is recommended to further reduce the risk of self-contamination.
  • Avoid contact with blood and body fluids of any person, particularly someone who is sick.
  • Do not handle items that may have come in contact with an infected person’s blood or body fluids.
  • Do not touch the body of someone who has died from Ebola."
 So, if you aren't currently in an Ebola affected area, treating suspected Ebola patients or planning to either eat bushmeat or take up embalming in West Africa, you probably don't need to worry much, right now.

That said, we're all about being prepared here, so in the interest of education and edification, here are some guidelines for how to protect against a virulent, non-airborne, aerosol-capable infective agent like the Ebola virus.


 N95 Respirator: Here is what the FDA have to say about the N95 rating on a facemask, or respirator

"An N95 respirator is a respiratory protective device designed to achieve a very close facial fit and very efficient filtration of airborne particles. In addition to blocking splashes, sprays and large droplets, the respirator is also designed to prevent the wearer from breathing in very small particles that may be in the air.
To work as expected, an N95 respirator requires a proper fit to your face. Generally, to check for proper fit, you should put on your respirator and adjust the straps so that the respirator fits tight but comfortably to your face. For information on proper fit, refer to the manufacturer’s instructions.
The ‘N95’ designation means that when subjected to careful testing, the respirator blocks at least 95% of very small test particles. If properly fitted, the filtration capabilities of N95 respirators exceed those of face masks. However, even a properly fitted N95 respirator does not completely eliminate the risk of illness or death.
N95 respirators are not designed for children or people with facial hair. Because a proper fit cannot be achieved on children and people with facial hair, the N95 respirator may not provide full protection."

Sorry kids and Tactical Beard Owners ...

Nitrile Examination Gloves:
 These tough and resistant gloves have a different feel to the more common latex examination glove, somewhat less tactile and more stiff, they have the become the standard for infection control PPE for this kind of situation.

Alcohol Based Hand Rubs are more effective against most bacteria and many viruses than either medicated or non-medicated soaps. Its common for me to squirt my hands with this stuff at work (even in my technical role) two or three times a day. It's ubiquitious at ever ward entrance and lift-well.

There is even some debate around alcohol-only ABHR versus alcohol-chlorhexidine ABHR: The addition of a low concentration of chlorhexidine to an ABHR results in significantly greater residual activity than alcohol alone and therefore potentially improves efficacy.

Then there is the "what do I do if I really, really don't want to be exposed, clinical worker level protection. Guidelines from the CDC again:


Recommended PPE for Trained Observer during Observations of PPE Doffing

The trained observer should not enter the room of a patient with Ebola, but will be in the PPE removal area to observe and assist with removal of specific components of PPE, as outlined below. The observer should not participate in any Ebola patient care activities while conducting observations. The following PPE are recommended for trained observers:
  • Single-use (disposable) fluid-resistant or impermeable gown that extends to at least mid-calf or coverall without integrated hood.
  • Single-use (disposable) full face shield.
  • Single-use (disposable) nitrile examination gloves with extended cuffs. Two pairs of gloves should be worn. At a minimum, outer gloves should have extended cuffs.
  • Single-use (disposable) fluid-resistant or impermeable shoe covers. Shoe covers should allow for ease of movement and not present a slip hazard to the worker.
Trained observers should don and doff selected PPE according to same procedures outlined below. Of note, if the trained observer assists with PPE doffing, then the trained observer should disinfect outer-gloved hands with an *EPA-registered disinfectant wipe or ABHR immediately after contact with healthcare worker’s PPE.

So, there you go: full fluid-proof gown, double-gloved, face-mask, booties. Even then, getting all this gear ON right isn't the only challenge. Getting it OFF again, when you have potientially been exposed is another task entirely. Which is why in hospital settings hey have those "Trained Observer" positions in the first place. All the PPE in the world isn't going to do you a lick of good if you rub that last contaminated piece of clothing on your face as you are getting it all off.

The University of Nebraska Medical Centre have these two excellent visual guides, which you may find useful:

Donning Visual Guide

Doffing Visual Guide

The question of "how long until it is safe to go back in there? "comes up: Again the CDC have all the answers:

How long does the Ebola virus persist in indoor environments?

Only one laboratory study, which was done under environmental conditions that favor virus persistence, has been reported. This study found that under these ideal conditions Ebola virus could remain active for up to six days. In a follow up study, Ebolavirus was found, relative to other enveloped viruses, to be quite sensitive to inactivation by ultraviolet light and drying; yet sub-populations did persist in organic debris.
In the only study to assess contamination of the patient care environment during an outbreak, conducted in an African hospital under "real world conditions", virus was not detected by either nucleic acid amplification or culture in any of 33 samples collected from sites that were not visibly bloody. Virus was detected on a blood-stained glove and bloody intravenous insertion site by nucleic acid amplification, which may detect non-viable virus, but not by culture for live, infectious virus.3 Based upon these data and what is known regarding the environmental infection control of other enveloped RNA viruses, the expectation is with consistent daily cleaning and disinfection practices in U.S. hospitals that the persistence of Ebola virus in the patient care environment would be short – with 24 hours considered a cautious upper limit.

Lastly, for area and surface disinfection, the relatively simple method of 1:10 chlorinated bleach in water to decontaminate highly soiled areas, and 1:100 to spray, soak and pre-wash infected areas bedding and equipment,  is believed to be highly effective.

So, be safe out there, but don't panic. There are far more common killers in the microbial world....
When
commercial
disinfectant
products
are
unavailable,
common
household
bleach
and
other
appropriate
disinfectants
may
be
effective
alternatives.
Use
a
1:10
solution
of
bleach
to
water
(e.g.,
1
cup
of
bleach
in
9
cups
o

Tuesday, May 20, 2014

Review: Source - Storm WXP 3L hydration bladder


Here's a much loved but oft forgotten item in my survival, training and adventuring kit. This is the
Source Storm WXP 3L hydration bladder which has seen some pretty heavy use in the past, and I thought it was fully worth showing the light of day.

Ive covered some hydration systems in the past, such as the the Platypus PIB hydration pack and several hydration bladder carriers, such as the lustful Geigrrig Tactical Guardian (I'd love to get my paws on one of these) the 0.75L version that come in the Tactical Tailor Joey hydration pouch and the backpack style Platatac Bravo pack. This isn't my first Source 3L bladder, as I failed to follow the care-and-cleaning guideline of DO NO USE BOILING WATER ... they melt. Hot enough for your hands is hot enough. More on this later.

The bladder itself is constructed from a very special three layer, coextruded polyethylene construction with a very special low maintenance liner layer. Integrated Grunge-Guard™ antimicrobial surface. This  435 micron thick surface prevents bio-film build up, my being almost glass-smooth, (Source quotes it as being  2000% smoother than standard TPU films, with virtually no difference from glass itself. This reportedly improves the systems self-cleaning function.

The wide opening access at the top opens with a slide closure for easy filling, draining and cleaning. The fold and slide lock gives a strong, airtight seal. A retaining cord ensures clumsy finders don't drop it in the muck, or let it wash downstream. It also means that you can add ice, or powdered drink supplements.

I found all the seams, including those at the tube attachment point to be very strong and well placed to take any tension that the bladder is challenged with, so far.

The drinking tube attaches to be bladder with their propriety QMT™ Quick Mate Technology hose fitting, which offers push button convenience, no leakage, and click-in compatibility with USMC Miox filter system. Sometimes the clip can be a little stiff, but hardly much of an issue for me, as I rarely took these off, except to rinse. However, even at the tube tip the QMT is completely self sealing.

This means that even with a full reservoir you can change tubes, add valves or whatever, without worrying about drips or leaks. Great for fitting a full bladder into a pack that already has a hose run through it. Sometimes hydration tube ports can be a snug fit.

The drinking tube is 94cm (37") long, and contains its own valve built in. Again, no drips or leaks when changing the tip or feeding it through bags and gear. The tube cover both insulates and blocks UV-light.

This helps your water cool and bacteria free from first to last sip. I really noticed this when doing long stretches in the sun with this. the temperature gradient from tube-to reservoir was always delightfully small.


The very cool push/pull Storm Valve isn't a bite-valve, being a pull-open plug like on a sport bottle. It apparently delivers 25% higher flow than bite designs. The integrated valve has a twist-lock which will lock the valve in the "off" position, so you don't have to worry about inadvertent leakage. It is also set at 90 degrees from the tube, which apparently reduces the required tube length (for twisting it around to have kink-free drinking) by 25cm! It also rotates 360 degrees, allowing you to place the valve end on any side of your gear, and have access to it.

It comes with a dirt-shield cover, which is also dummy-corded on, and can be cinched with a dedicated slit, to stop it from dangling and rattling about when not used.



In addition to the Widepac wide opening access at the top, with its hanging slot,  the bladder also has a screw-top opening, which incorporates a carry-yoke. The yoke can be rotated to best suit your carry style, but allows even gloved hands to hold the bladder open for refilling without contaminating the reservoir.

The gasket screws down over the yoke to hold it in place, and is also dummy-corded to the wide-mouthed cap. I have had some troubles with the gasket winding loose, and this impacting on the seal the cap gets, but if its screwed down tight, all should work out well. 

Evacuating all the air from the bladder keeps it very quiet, no canteen-sloshing noise-disipline worries there, and the placement of the tube to the bladder means you pretty much get every drop emptying out, you can even set it to run continuously, using siphoning, to get regular irrigation, or when running detergent through it to clean it. The guys at Platatac recommended throwing it, washed but not dried into the freezer as a decontamination step, which is a far better idea than melting it with overly hot water, I have to say.

This particular bladder has seen me through camping, long haul drives, and three Tough Mudders, and it's going strong! I even inflated it and used it as a flotation aid when diving off one of the "Walk the Plank" high dives on Tough Mudder.

I'd love to try one of the Universal Tube Adapter  attachments, which lets you fill the pack from the drinking valve, from taps or bottles, without having to take it off your pack or out of a pack.

Thursday, March 27, 2014

Home Front: Influenza vaccination

It is the onset of the Flu Season here, and a fringe benefit of working in Medical Science IT is that I am eligible for free vaccination, as I have been for the last 15 years. I have gotten my flu-vaccination, as well as every other vaccination that had been offered to me, since birth, and considering some of the places I've lived, I'm rather grateful that I have done so.

I actually fell ill with the Swine Flu in 2009, despite vaccination, (more on this later). The key for me is to be as best prepared for a possible widespread, possibly devastating pandemic .

There has been a lot of controversy about vaccination, and perhaps this might go some way to indicate some of the technical advantages and aspects of this vaccination (and others).
My FluVax was the GlaxoSmithKline 0.5mL dose of FLUARIX containing 15ug of each of the three types of influenza virus fragments. •A/California/7/2009 (H1N1)-like virus, •A/Texas/50/2012(H3N2)-like virus, •B/Massachusetts/02/2012-like virus. The H3N2 is a virus antigenically like the cell-propagated prototype virus A/Victoria/361/2011.

Each year the vaccines are designed to meet the predicted strains of interest,  and they work by causing the body to produce its own antibodies against those types of influenza virus, but not against other strains or other flu-like infections.



Protection from these three strains is reported to occur within 2 to 3 weeks of vaccination, and is expected to last for 6-12 months. This protection has been found to be 65-100% effective.

This kind of vaccination is generally injected into the upper arm muscle and is produced in chicken eggs, which the virus has been concentrated and purified by clarification, adsorption and centrifugation.

The purified whole virus is then treated with the detergent sodium deoxycholate and again centrifuged, and the resulting antigen suspension is inactivated with formaldehyde.

As with all medication, there are potential side-effects, and the vaccination process can even illicit illness symptoms, as the body fights off an apparent (but inactive) infection. However, given the debilitating severity of influenza, even with low case fatality rate strains, I think that part of my preparation regime is to be as well vaccinated as I can be and it's well worth those risks. What you can't see CAN kill you ....

Thursday, July 25, 2013

Last days for backers - MS Cleaning kits

 Hi all, I am still looking for people to buy-in with me to help these guys get their project over the line.



my original post is here:
Aussie-readers MS Cleaning Kits

they can ship a dozen kits to Australia for $60 for shipping, on top of the item pledge levels.... or 2 for $40 shipping...

Peter did a podcast which explains the MS Clean and the direction of the company... among other things. Check it out.
http://www.ar15podcast.com/034/


drop me a comment, email or IM if you're keen....

Tuesday, July 2, 2013

Quick Question for Aussie readers.... MS Clean

Would any of you in Australia be interested in picking up one of these slide-opening, hard sided, magazine shaped cases?

http://www.kickstarter.com/projects/823246061/ms-clean-the-magazine-shaped-cleaning-kit

The guys behind them are willing to ship me a box of 12 of them, at around $15 a case, plus $60 or so for shipping to Australia, for a total of about $20 a pop. (They are not offering international shipping as part of their bid, so are doing me a solid favour).

Designed to fit any standard magazine pouch (like the FUP, SCAR chest rig, 60 rnd Pouch, or the like), whilst being slightly too large for the magazine well of a rifle (to avoid that kind of accidental loading). Enough room to hold all your standard rifle cleaning needs, but also a great size for a bunch of other items...

I would love to get a few for myself for use in lasertag MilSim and costuming, as well as the cool factor, but I can't really justify getting a dozen of them, so I am putting it out to you my Aussie readers ... fancy one, willing to chip in and/or buy one when they come i, later in the year? You'd be one of the only Australians with one, as they don't think they'd ship any others over the Pacific.

Message me on apocalypseequipped@gmail.com and I'll let Pete and Trevor know. Help me help a couple of Texan lads out with their cool idea.

Thursday, March 7, 2013

Review: EcoFuture - Aqua Prove

So, full disclosure, following on from my review of EcoFuture's Organic hand-cleanser and Biodefence Athletic Foot spray they asked me to work as a consultant for them, and advise them on their documentation and product specifications. I was delighted to be on-board, and looking forwards to working more with them on upcoming projects. I'm not, however, being paid to blog, or review their products, but when cool new things come my way that I think have something to bring to the field of being Apocalypse Equipped, I'll bring it.
Microbial water contamination is a big deal, and anyone who has traveled in the developing world can tell you, it can be very un-fun. When sophisticated modern water treatment is out of your reach, having a reliable alternative treatment method is key.

This kit offers one method, utilising Chlorine dioxide as a bactericide, anti-viral and protozoal cyst killing agent, which works by oxidising and disrupting the cell membrane, cell wall and proteins of these microorganisms, whilst being safe to humans, and leaving no environmentally harmful residues.

It produces 0.2% aqueous ClO2 in a pouch/pocket sized bottle, from a single capsule into the dropper bottle. Once dissolved, 4 - 8 drops to 1L (32Oz) of water, left standing for 5 minutes, should be sufficient to treat most water safely.

It is packaged in a sufficient quantity to purify 250L (66gal) of water, and in a bottle small enough to include in ones on-flight baggage. This is a really great idea, and from my testing, adds no noticeable taste to the water in my Nalgene, my SIGG or my hydration bladders, unlike iodine tablets.

I've splashed some drops around in my bottles empty, when I've thought they might be a bit "on-the-nose" or slimey inside, and they have come back really well, no stains or marks, and better still, no more stink.

When I head away from regular treated water, either adventuring, traveling, or off-grid, I'll be glad of this, to keep me regular, in a good way.




Wednesday, February 13, 2013

Events: Tough Mudder #2 Melbourne 2013

 I ran the Tough Mudder again this year, January 19th, which was a lovely sunny, breezy day here in Melbourne.

The event was held at the Phillip Island Raceway again, which lays an hour and a three quarters drive from Melbourne, and backs onto the Bass Strait. I had only recently been given the all clear from the ankle troubles of late last year, and had not had a lot of preparation, baring three or four runs, of 2 - 5km, so I wasn't sure about how I would cope, not only with my ankles, or my general lack of CV fitness as a result of my injury, the prednisone treatment (25mg daily, dropping 5mg each week to wean away).

Regardless, I had booked in, and was raring to go. I had tried to drum up interest from the folks I ran with the previous year, but no takers (although it turns out, a couple did the event as it happens).

For those who don't know what the Tough Mudder is, it is a 20+km endurance challenge, with 25+ military inspired obstacles. The events run world-wide, in all conditions, and feature some signature obstacles, namely, lots, and lots of mud, electrical wire filled corridors, and pools swimming under barriers, ice filled pools and all manner of climbing, crawling, and of course, running. I hate running.


The above pics are me before the race, in my running kit, pretty much the same outfit that I wore for the previous endurance event I did, the Stampede with the First Spear OAGRE vest, with my Source 3L bladder in the back, and snap-fixed to the 5.11 Tactical TDU belt, keeping the vest snug to me and my TAD Amphibious Shorts with my trusty Blackhawk! kneepads, which were again, a real bonus, so, "i told you so" to all the scoffing runners out there. You can see me, fresh from the Arctic Enema/Chernobyl Jacuzzi ice bath and dunk, fishing a couple of ice-cubes out from my kneepads. I also wore my iPhone, in its SLXtreme case mounted in the Platatac PRR pouch I got specifically for the event. On my head I wore one of my caps, which I had modified to carry a picatinny rail, in order for me to mount my Contour GPS helmet-cam to, via the Strikemark adapter I have. I also added a chin-strap to the cap, to help deal with the added weight of the camera, which seemed to work pretty well. I wore one of the Under Armour t-shirts from the previous Tough Mudder and my Ironclad gloves.

I also swapped out boots, having put my Altama's into retirement and for this event, I wore my Bates Delta-8's which really held up well, and cleaned up tremendously.

Here's one of me having scaled a 2m "Berlin Wall" and torn my number off in the process. Lesson learned, bring my own safety pins or lashing system. Their little pins were ineffective!


This is me and my running-mate, #7819 :) doing the SHINBASHI salute after coming over the Bale Bonds.

She and I knew each other socially, and upon hearing my interest in a running-mate, signed up, regardless of trepidation and obstacle-shyness. Far better a runner than I, we kept a good pace, she kept me going on the straights, and I helped her along on the climbing, jumping and swimming, crawling and squelching.

She started the race with a black headscarf to match her all-black running slicks. I was referring to us as "day-ops" and "night-ops". My gear was already mud-coloured, and my head higher up, so don't think that I was getting away unscathed ...

We did the course in just under 4 hours, I felt that it was actually a lot easier this year, even without all the extensive running I did prior to the previous events. This may be in no small part to mental preparation, and experience. There were no "I haven't done it before" nerves. I made it over every obstacle on my own steam, climbed every wall, made it across the slippery monkey-bars, made it up the Everest half-pipe on my first run. I was rally pleased with not only my pace, but the speed I overcame the obstacles in my path, but also how I was able to help me fellow Mudders.



Here I am, following the event, having stripped off the OAGRE, sporting my celebratory headband, and working up the guts to pull my boots off. Not a blister, or scratch, but a lot of grit and muddy water. It turned out that the time-lapse application I had hoped to run on my iPhone hadn't begun, but the SLXtreme and PRR combination had worked like a dream. The Picatinny rail I had mounted the Contour cam on needed to be at more of a down-angle, I took a lot of 3/4 sky footage, but see below for my links.

I dinged my shin whilst hurdling a log, and gave myself this exciting bruise on the back of my left thigh. Last year I had two of these, one on the back of each thigh. This year I pegged the moment when I got it ... scaling one of the 4m Berlin Walls, lesson learned? major muscle groups do not make good leavers!

A great event, a good challenge, and certainly a good conditioning and preparation experience.

Will I do it again? hells yes. As many, and as often as I can manage.


http://contour.com/videos/watch/tough-mudder-jan-2013-1-1
http://contour.com/videos/watch/tough-mudder-jan-2013-1-2--6
http://contour.com/videos/watch/tough-mudder-jan-2013-1-4--3
http://contour.com/videos/watch/tough-mudder-jan-2013-1-5
http://contour.com/videos/watch/tough-mudder-jan-2013-1-6
http://contour.com/videos/watch/tough-mudder-jan-2013-2-1--3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-2--2
http://contour.com/videos/watch/tough-mudder-jan-2013-2-3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-4--4
http://contour.com/videos/watch/tough-mudder-jan-2013-2-5--3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-6
http://contour.com/videos/watch/tough-mudder-jan-2013-3-1
http://contour.com/videos/watch/tough-mudder-jan-2013-3-2
http://contour.com/videos/watch/tough-mudder-jan-2013-4-1
http://contour.com/videos/watch/tough-mudder-jan-2013-4-2
http://contour.com/videos/watch/tough-mudder-jan-2013-4-3
http://contour.com/videos/watch/tough-mudder-jan-2013-4-4
http://contour.com/videos/watch/tough-mudder-jan-2013-5-1
http://contour.com/videos/watch/tough-mudder-jan-2013-5-2
http://contour.com/videos/watch/tough-mudder-jan-2013-5-3
http://contour.com/videos/watch/tough-mudder-jan-2013-5-4
http://contour.com/videos/watch/tough-mudder-jan-2013-5-5
http://contour.com/videos/watch/tough-mudder-jan-2013-6-2


Tuesday, February 12, 2013

Wish Lust: Geigerrig Tactical Guardian hydration pack

Following on from this years SHOT show, I saw a link from the guys at Soldier Systems, reporting from the OR (I presume that stands for Outdoor Recreation, or something to that effect) on a really cool hydration system.

The Geigerrig comapny have a rather unique offering, with a pressurized hydration system. This system involves having a bladder with a hand pump (like the kind Dr's use to take your blood pressure on a elbow collar) to pump air into the bladder, squirting it out of the bite-valve.
This is the Guardian model, which I fell in wish-lust with ....
 It features a 2L (70oz) bladder (although they do offer a 3L bladder as well) which has fittings for drinking tube and pressurization tube which are both quick-release valved, and offers a slide-top for easy filling and cleaning. Skanky hydration bladders are no-ones friend!


Better yet, they have a variety of carriers for these bladders, all designed to contain the pressure, and give you a secure, continuous pressure water-source. 

The fabric of the carrier is a light and rugged 500D Cordura, with PALS/MOLLE strips on top and bottom, six D-ring attachment points for lashing it your pack, vest, plate carrier or what-have you, should you decide to forgo the built in (but stowable) pack straps. 

Twin compression straps add to the pressure and stability of your water-load, but the real magic here is the hard nylon "guardian plate" which backs the carrier. This was the real magic for me, as it offers something that I've noted was missing, a slick, hard backing to my hydration carrier. I am very happy with my Platatac Bravo but I found that when on Tough Mudder, crawling through pipes and under netting, and barbed wire, that it caught on occasion, as well as getting in and out of vehicles with it, a slick turtle-back would be a great advantage to both toughness, and drag-reduction.


Couple this with the in-line cyrpto and virus filters and you have a very resilient, functional pressurized hydration system. Hydrate, wash wounds, clean goggles all on the bounce, from a secured and armoured platform!

What's NOT to lust after?





Related Posts Plugin for WordPress, Blogger...